CCIE R&S v5 Exam Review on 12 November 2015
Thank you cciereallabworkbook and thos who share their experiences. Here is my lab details:
1- Mac address sticky with wrong MAC on SW1.
2- Missing ppp ipcp route def. on R12
3- Passive interface on R5 and wrong subnet lenght on R22.
4- Dist list on R13 and missing metric weights.
5- Missing next-hop-self on R22.
6- Wrong next-hop address on R22 and R25, plus R25’s et 0/0 int is not configured properly for getting ipv6 add from DHCP.
7- Missing ip nhrp redirect and split horizon on R15.
8- No nat config on R7 and R8. For failover scenario, added ip ospf cost on R4&R6 and def originate route-map on R8.
9- Wrong crypto on R25.
10- Nas was getting wrong IP from dhcp and for telnet missing http server and http port on R23.
NOTE: do not forget to check ip cef.
1- SW3 port sec
2- R15 need to exclude NBMA add.
3- URPF BGP policy
Everything is same. MST, eigrp strongest auth, VRF, terminal shell, ntp auth.
NOTE: the questions said that NTP is pre-configured, however there were no ntp config. I configured NTP server and clients. be careful with that and read all the questions.