CCIE R&S v5 Exam Review on 26October2015
First of all i thank this forum and the people here for being very helpful to acheive my dream.
I share my experience here
q1 : sw port in wrong access vlan
q2: ppp ipcp missing in r17
q3: max-metric in r5,cost in r21
q4:bandwidth in r13,metric weights added
q5:local preference for 220.127.116.11
q6: next hop wrong in r25,net in wrong subnet
ipv6 add was manually configured.
q7: redistribute connected in r15 —created a route map denying nbma
ip nhrp shortcut missing in all spokes
q8: import,export ,default-originate missing for 123n/w in r7 & r8,
ip nat outside missing
q9: crypto mismatch
q10:nat statement ,ip domain look up in NAS
q1 : sw port-security , ask for mac-address
q2: redistribute connected in r15 – exclude nbma
q3: urpf with acl
here q3 is very easy . carefuly read the description given and look at the diagram
you can easily do it.
sw1,sw2 – vtp domain and passw were asked to save in running-config
vtp mo was not mentioned,. transparent mode was pre-configured.
r15,16,17 named mode with strongest authentication
vrf was preconfigured. vrf forwarding was missing on interfaces of r16,17
tunnel ip was in 10.x.x.x.x nw and loo 0 sw3,sw4 were different.
be careful with that.
r6,r7 were preconfigured. r20 was partially preconfigured
multicasting: assign an unused port to vl 5.
shell processing full
ntp was preconfigured ==authentication was asked.